Starter coil rewired

I opened my starter that was "rebuilt" 15 months ago because I was having trouble with the solenoid and found rotten main wires. So I crimped and soldered new ones on. Here is what I did.





Tip: don't try this with a torch or an iron less powerfull than 2-300 watts. The tourch will turn it blue and prevent the solder from sticking and the less powerfull iron will take too long to heat and melt the insulation of the coils. I used silver solder and steel crimps but it is not really necessary just use tin/ lead and tie the joint tight with wire before soldering.